How to Make an Incept Bag Headband


What you will need:

A ruler.

A pair of scissors.

A hot glue gun.

Glue sticks for the hot glue gun.

A head band (any color or size of your choice.)

And, of course, your Incept bag.

Headband Materials

Step 1:

Cut off the front portion of the bag.


Step 2:

Cut two strands that are 1 and 1/2 inches wide and 8 inches long.

Cut one strand that is 3/4 inches wide and 4 inches long.

(Place the smallest strand aside for now.)


Step 3:

Take each larger strand and fold them length-wise.


Step 4:

Crease each larger strand down the middle at the fold.


Step 5:

Add drops of hot glue to the left of the crease line.


Step 6:

Fold the left side of the strand onto the hot glue.

Add hot glue to the right side of the crease line.


Step 7:

Fold the right side of the strand onto the hot glue.

Repeat steps 5 & 6 for the other large strand.


Step 8:

Place a small dab of hot glue in the center of the bow.

Use your fingers to pinch the bow together.


Step 9:

Take the pieces of the bow, right in front of where you just hot glued, and fold those pieces back.

Use hot glue to secure these two folds down.


Step 10:

Repeat steps 8 & 9 for the other larger strand.

You should now have tw0 portions that resemble small bows.


Step 11:

Take these two small bows, stack them on one another.

Hot glue them together at the center of each.

Place the bow aside.


Step 12:

You will now need the leftover blue material from your Incept bag.


Step 13:

Cut between 3-5 strips about 1/5 inch wide and 10 inches long.


Step 14:

Take one strip and hot glue it to one of the ends of the headband.

Make sure the strip is being placed away from the headband.


Step 15:

Fold the strip back onto the headband and secure with hot glue.


Step 16:

Begin wrapping the strip around the headband.

Be sure to do this as neatly and tightly as possible.


Step 17:

For this headband, I only needed 3 strips.

The number of strips will depend on the size of your headband.

**Note: to avoid frayed ends, use a lighter to heat all of the sides of the strips.**


Step 18:

Take a blue strip and hot glue the end to where you want the center of your bow to be located.


Step 19:

Hot glue the center of the bow onto the headband.

Wrap the rest of the blue strip around the center of the bow.

This will help the bow remain secure on the headband.


Step 20:

Take the small strand you cut earlier and also wrap it around the center of the bow.

Use hot glue to secure this strand.


Step 21:

CONGRATULATIONS! You made a GSU headband!

Your spirit wear is now ready to be worn at Georgia State University sporting events!



Don’t forget to share your #InceptBag creations!

4 Responses to How to Make an Incept Bag Headband

  1. dính ngày càng tăng cao mau chóng ko xu thế làm giảm nhiều người bị đã xài cao chủng hiệu thuốc nhằm chữa trị tuy vậy dạy cách quan hệ

  2. Thanks for taking the time to discuss this, I feel strongly about it and love learning more on this topic
    refinance rumah malaysia

Click on a tab to select how you'd like to leave your comment

Leave a Reply